Absorption
Ammonia-water (NH₃-H₂O) and lithium bromide (H₂O-LiBr) absorption thermodynamic cycles, and Type I and Type II absorption heat pumps.
How it works: AbsorptionEquipment family
Heat pumps that use natural gas or LPG for heating, DHW and cooling, with minimal electricity demand.
Technology
A gas heat pump uses natural gas or LPG as its driving energy and also harnesses renewable energy from the air, the ground or water. Its electricity demand is very low, which makes it a good solution for buildings with limited electrical capacity or where full electrification is not viable.
The family brings together two technologies. Robur GAHP absorption heat pumps (the air-source A Plus, the reversible AR Plus, the ground-source GS Plus and the water-source WS Plus) reach a GUE of up to 174 % with the natural refrigerant R717, and Robur LINK packages combine them with chillers and boilers in a prefabricated plant. Aisin GEHP F series gas engine-driven compression heat pumps, with a Toyota engine, provide air conditioning with VRF or hydronic systems and produce DHW with the heat recovered from the engine.
Ammonia-water (NH₃-H₂O) and lithium bromide (H₂O-LiBr) absorption thermodynamic cycles, and Type I and Type II absorption heat pumps.
How it works: AbsorptionThe compression cycle explained, and how a gas engine-driven compression heat pump works.
How it works: CompressionRanges
6 ranges from Robur and Aisin. Nominal data from the manufacturer's technical data sheets.
Robur
Air-source gas absorption heat pumps for heating and DHW
Robur
Reversible gas absorption heat pumps: heating, cooling and DHW
Robur
Ground-source gas absorption heat pumps
Robur
Water-source gas absorption heat pumps
Robur
Prefabricated thermal plants combining heat pumps, chillers and boilers
Aisin
Gas engine-driven compression heat pumps with a Toyota engine, for VRF or hydronic (AWS) systems
Comparison
Nominal values from the manufacturer's technical data sheets.
| Range | Manufacturer | Cooling capacity | Heating capacity | Energy | Efficiency | Energy class |
|---|---|---|---|---|---|---|
| Robur GAHP A Plus | Robur | — | 44.6 kW | Natural gas or LPG + air | GUE 172 % | A+ (A++ low-noise version) |
| Robur GAHP AR Plus | Robur | 16.9 kW | 38.8 kW | Natural gas or LPG + air | GUE 154 % (heating) · 67 % (cooling) | A+ |
| Robur GAHP GS Plus | Robur | — | 43.0 kW | Natural gas or LPG + ground | GUE 165 % | A++ |
| Robur GAHP WS Plus | Robur | — | 45.3 kW | Natural gas or LPG + water | GUE 174 % | A++ |
| Robur LINK | Robur | 16.9 – 88.5 kW | 21.0 – 225 kW | Natural gas or LPG | Depending on configuration | Depending on version |
| Aisin GEHP F series | Aisin | 42.5 – 170 kW | 50 – 190 kW | Natural gas or LPG | SPER heating 1.55 SPER cooling 2.44 |
A++ |
The rating conditions for each capacity are given on the range's page.
Selection criteria
Projects
District heating with ROBUR air-source gas heat pumps on the Mas Sallent estate
La Ventajola housing development (La Cerdanya). Gas-fired ground-source heat pumps for heating and DHW.
HVAC system with an AISIN GHP gas heat pump at Hotel Sant Metges in Sant Julià de Ramis (Girona)
Downloads
Tell us the capacity, the services you need and the energy available. We'll recommend the configuration and send you a proposal.